Juniper Networks EX8208 - Manual (Page 157)

Table 53: Accessory Box Parts List
Quantity Component
1 Label, accessories contents
1 Accessory kit box
1 Quick Start installation instructions
1 Left front adjustable mounting bracket
1 Right front adjustable mounting bracket
2 Rear adjustable mounting brackets
12 Screws to connect the front pieces and rear pieces of the adjustable mounting brackets for four-post rack
installation.
Each bracket consists of a front piece and a rear piece. Six screws connect the front-and-rear pieces of each
of the two adjustable mounting brackets.
1 Power cord tray
12 Velcro tie-wraps for power cord tray
6 Power cord retainers
1 Juniper Networks Product Warranty
1 End User License Agreement
1 Juniper Compliance Form Letter, RoHS Worldwide
1 Ethernet cable, RJ-45/RJ-45, 4-pair stranded UTP, category #5
1 RJ-45 to female DB-9 cable, to connect to the switch's console port using a management PC's serial port
1 ESD grounding strap
131 Copyright © 2010, Juniper Networks, Inc.
Chapter 8: Installing the Switch