Juniper Networks EX8208 - Manual (Page 34)

Table 1: EX8208 Switch Hardware Configurations (continued)
Configuration Components Switch Configuration
• Chassis with backplane
• One fan tray
• Two SRE modules
• One SF module
• Six 3000 W AC power supplies
• Six power cords
• Eight line cards
Fully loaded chassis configuration (AC with 3000 W AC power
supplies)
• Chassis with backplane
• One fan tray
• Two SRE modules
• One SF module
• Six 2000 W DC power supplies
• 24 DC power cable lugs
• Eight line cards
Fully loaded chassis configuration (DC)
NOTE: You can install up to eight line cards (any combination of line cards) in the
switch.
NOTE: Line cards are not part of the base or redundant configuration. You must order
them separately.
NOTE: If you want to purchase additional power supplies (AC or DC) for your switch
configuration, you must order them separately.
Related Topics Chassis Physical Specifications of an EX8208 Switch on page 9 •
• Switch Fabric and Routing Engine (SRE) Module in an EX8208 Switch on page 24
• Switch Fabric (SF) Module in an EX8208 Switch on page 28
• 8-port SFP+ Line Card in an EX8200 Switch on page 30
• 40-port SFP+ Line Card in an EX8200 Switch on page 31
• 48-port SFP Line Card in an EX8200 Switch on page 33
• 48-port RJ-45 Line Card in an EX8200 Switch on page 34
• AC Power Supply in an EX8200 Switch on page 40
• Cooling System and Airflow in an EX8208 Switch on page 53
• Backplane in an EX8208 Switch on page 55
Copyright © 2010, Juniper Networks, Inc. 8
Complete Hardware Guide for EX8208 Ethernet Switches