Figure 3: slot numbering for an ex8208 switch – Juniper Networks EX8208 User Manual
Page 40
Advertising
Table 5: Slot Numbering for an EX8208 Switch (continued)
Components Accepted in Slot
Slot Label
Line card
4
Line card
5
Line card
6
Line card
7
Figure 3 on page 14 shows the slot numbering, which is on the front left of the chassis.
Figure 3: Slot Numbering for an EX8208 Switch
Slots 0 through 7 accept one of the line cards available. See “Installing a Line Card in an
EX8200 Switch” on page 160.
Slots SRE0 and SRE1 accept only the SRE module. You can install one SRE module or
two SRE modules based on the configuration of your switch. See “Switch Fabric and
Routing Engine (SRE) Module in an EX8208 Switch” on page 24.
Copyright © 2010, Juniper Networks, Inc.
14
Complete Hardware Guide for EX8208 Ethernet Switches
Advertising