Juniper Networks EX8208 - Manual (Page 175)

CHAPTER 9
Installing Switch Components
• Installing and Removing EX8208 Switch Hardware Components on page 149
• Installing an AC Power Supply in an EX8200 Switch on page 150
• Installing a DC Power Supply in an EX8200 Switch on page 152
• Installing a Fan Tray in an EX8208 Switch on page 154
• Installing an SRE Module in an EX8208 Switch on page 155
• Installing an SF Module in an EX8208 Switch on page 157
• Unpacking a Line Card Used in an EX8200 Switch on page 159
• Installing a Line Card in an EX8200 Switch on page 160
• Installing a Transceiver in an EX Series Switch on page 163
• Connecting a Fiber-Optic Cable to an EX Series Switch on page 165
Installing and Removing EX8208 Switch Hardware Components
The field-replaceable units (FRUs) in an EX8208 switch are:
• Switch Fabric and Routing Engine (SRE) module
• Switch Fabric (SF) module
• 8-port SFP+ line card
• 40-port SFP+ line card
• 48-port SFP line card
• 48-port RJ-45 line card
• Power supplies (AC and DC)
• Fan tray
• SFP transceiver
• SFP+ transceiver
The SRE module and SF module are hot-removable or hot-pluggable depending on the
configuration of the switch. See “EX8208 Switch Configurations” on page 6.
149 Copyright © 2010, Juniper Networks, Inc.