Sun Microsystems Sun Fire V880 - Manual (Page 103)

Maintaining disk drives
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006 103
15. Enter:
luxadm insert
The following message is displayed:
16. Release the drive handle on the replacement disk drive. Use your thumb and forefinger to
pinch the drive latch upward to open it.
17. Align the disk drive with its drive bay. Orient the drive so that the drive handle hinge faces
the bottom of the drive bay.
18. Holding the drive by its handle, fit the drive into the guide rails at the top and bottom of the
drive bay. See the following figure.
19. Slide the drive into the bay until it barely contacts the backplane.
20. Press carefully on the center of the drive. The drive handle begins to close as the drive
engages its backplane connector.
21. Press the handle toward the drive until the latch closes, securing the drive in place.
Please hit <RETURN> when you have finished adding Fibre Channel Enclosure(s)/
Device(s):