Sun Microsystems Sun Fire V880 - Manual (Page 55)

Turning the computer off and on
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006 55
To turn on the computer:
1. Turn on any external SCSI devices, starting with the device that is farthest from the system
and working toward the system.
2. Turn on the system monitor.
3. Turn the key switch to the normal On position. See the following figure.
4. Press and release the power button to the left of the key switch to turn on the system.
Note:
Note:
The POST diagnostics occurs each time that you turn on the system. The POST
tests the basic system components. This may take several minutes.
If the system is operating properly, a banner screen is displayed within about 5 minutes
after it is turned on.
5. Log in to the system as root.