Sun Microsystems Sun Fire V880 User Manual
Page 180
Troubleshooting
180
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting
May 2006
The PCI slot LEDs are defined as follows:
The following table shows how to interpret the PCI slot LED patterns.
Name
Icon
LED function
Power on
Lights when the slot is receiving power.
Fault
Blinks while the card is being tested, when a hot-plug
operation is in progress, or when the card is turned on
but logically detached from the operating system.
Stays lit if the card encounters a fault.
OK-to-remove
Lights when it is safe to remove the card.
Important: If this LED stays lit after inserting a card,
you must shut down the system, reinsert the card, and
reboot the system. Consult the customer before you
shut down the system.
Icon
Interpretation
Power on
Fault
OK-to-remove
Off
Off
Off
The slot power is off. A card can be safely
inserted to start a hot-plug operation.
On
Blinking
Off
The installed card is being tested,
configured, or unconfigured, or the card is
turned on but logically detached from the
operating system.
On
Off
Off
The slot power is on and the card is
operating normally.
Off
On
On
The PCI card has encountered a fault. The
card can be safely removed.
Off
Off
On
The card can be safely removed.