Sun Microsystems Sun Fire V880 - Manual (Page 69)

Maintaining PCI cards
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006 69
!
Important:
Important:
If you are removing the ethernet cards to rearrange them in the correct order (see
Reconfiguring PCI network cards on page 61 for more information), label the
network cables so you can reconnect them to the correct network cards and
ports.
6. Press the hot-plug button for the card you are removing.
The Fault LED for the slot blinks while the card is being unconfigured.
7. When the OK-to-Remove LED lights, the card can be removed from the computer.
CAUTION: !
CAUTION:
Do not remove the card until the OK-to-Remove LED lights. If you remove the
card when the OK-to-Remove LED is off, the system will fail.
8. Pinch the purple PCI card retaining clip until it releases from the back of the card and
rotate the clip outward. See the following figure.