Required references, Replacing disk drives – Sun Microsystems Sun Fire V880 User Manual

Page 98

Advertising
background image

Maintenance

98

Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting

May 2006

Required references

You need access to the following documents to do the disk maintenance procedures:

The CMS software installation, maintenance, and troubleshooting document for your CMS
release

Sun Fire 880 Server Service Manual or Sun Fire V890 Server Service Manual at the Sun
documentation Web site:

http://docs.sun.com

Replacing disk drives

The procedures for replacing disk drives is different for the following scenarios:

Replacing a single boot disk: If at least one of the boot disk drives (primary or mirror) is in
operation, you can hot-plug a replacement boot disk drive without turning off the system. See

Replacing a single boot disk or replacing data disks

on page 99.

Replacing data disk drives: When replacing one or more data disk drives, you can hot-plug
the replacement disk drives without turning off the system. See

Replacing a single boot disk or

replacing data disks

on page 99.

Replacing both boot disks: If both boot disk drives are defective, you must shut down and
turn off the system before replacing the disk drives. See

Replacing both boot disks

on

page 105.

After replacing the disk drives, continue with

Setting up the disk drives

on page 109.

Advertising
This manual is related to the following products: