Sun Microsystems Sun Fire V880 - Manual (Page 19)

Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006 19
Installation
This section describes how to install the computer and related peripheral equipment. Use the
following table to check off each required procedure after completion.
Procedure Completed
Preparing for installation on page 20
Unpacking and inventorying the equipment on page 25
Setting up power on page 35
Peripheral connectivity on page 36
Connecting the monitor, keyboard, and mouse on page 38
Connecting the remote console modem on page 39
Connecting to external interfaces :
●
Connecting the switch link on page 40
●
Connecting to the customer network on page 40
Turning on the system and verifying POST on page 41
Identifying installed PCI cards on page 44
Setting the remote console modem options on page 46
Turning the system over for provisioning on page 48