Sun Microsystems Sun Fire V880 - Manual (Page 115)

Maintaining disk drives
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006 115
12. Enter: y
A message similar to the following is displayed:
13. If you added more than one disk drive, enter disk, and repeat Steps 2 through 12 for each
drive.
14. After you have partitioned each drive, enter: q
15. Continue with the restore procedures as described in
Setting up the disk drives on
page 109.
Begin format. The current time is <timestamp>
Formatting...
done
Verifying media...
pass 0 - pattern = 0xc6dec6de
4923/26/7
pass 1 - pattern = 0x6db6db6d
4923/26/7
Total of 0 defective blocks repaired.
format>