Sun Microsystems Sun Fire V880 - Manual (Page 133)

Maintaining tape drives
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006 133
34. Enter:
probe-scsi-all
In its default configuration, the computer should list two SCSI devices: the internal tape
drive (Target 5) and the DVD drive (Target 6).
35. Reboot the system by entering the following commands:
CAUTION: !
CAUTION:
If you fail to enter these commands, any reboots that you do in the future will stop
at the boot prompt instead of proceeding through the normal boot-up process.
setenv auto-boot? true
boot -r
This reboots the system so that it recognizes the new configuration.