Sun Microsystems Sun Fire V880 - Manual (Page 179)

Tools
Avaya CMS Sun Fire V880/V890 Installation, Maintenance, and Troubleshooting May 2006 179
PCI slot status indicators
The PCI slot LEDs are located on the vertical bracket on the right side of the PCI slots and are
visible when the left door is open. There is a hot-plug button and three LEDs for each PCI slot,
as shown below.
Thermal
fault
This amber LED lights to indicate a serious thermal fault (fan
fault or overtemperature condition) that is likely to bring down
the system. There are two Thermal Fault LEDs in the display
to indicate whether the fault is located on the left or right side
of the system. In the event of a fan fault, a fault LED inside the
system will indicate the faulty fan assembly.
Attention left
side
This amber LED lights to indicate that an internal component
on the left side of the system requires servicing.
Attention
right side
This amber LED lights to indicate that an internal component
on the right side of the system requires servicing.
Hot-plug
buttons