Connecting the pads patient cable, Connecting the pads patient cable -2 – Philips HEARTSTART XLT M3500B User Manual
Page 100
Advertising
Connecting/Disconnecting Patient Cables
10-2
Setting Up and Configuring the HeartStart XLT
Connecting the Pads Patient Cable
To connect the pads patient cable to the defibrillator:
1. Align the white pointer on the pads patient cable with the white arrow on
the defibrillator’s pads connector, as shown in Figure 10-1.
2. Insert the patient cable into the pads connector. Push until you hear it
click in place.
Figure 10-1 Pads Patient Cable Connector
Pointer
Pads connector
Advertising