Philips HEARTSTART XLT M3500B - Manual (Page 32)

Using a Data Card
2-12 Getting Started
Inserting a Data Card
To insert a Data Card:
1. Make sure the HeartStart XLT is powered off.
2. Press up on the release latch to open the door to the Data Card compart-
ment.
3. If a Data Card is already in the compartment, press the black button inside
the compartment to eject the card (see Figure 2-8). Then pull the card out.
4. With the yellow label facing up and the pointing towards the Heart-
Start XLT, slide the Data Card into the compartment.
5. Close the Data Card compartment door. Make sure that you hear a click,
indicating that the door is latched shut.
Figure 2-8 Inserting a Data Card
Eject