Philips HEARTSTART XLT M3500B - Manual (Page 69)

Discontinuing SpO2 Monitoring
M3500B HeartStart XLT Defibrillator/Monitor 5-9
5
Discontinuing SpO
2
Monitoring
To shut off SpO
2
monitoring, press repeatedly until nothing appears
below the softkey.
Figure 5-5 SpO
2
Monitoring Off
Caring for Sensors
Refer to the manufacturers instructions for care and cleaning of sensors. To
get the best results from your SpO
2
reusable sensors, always handle the sensor
and cable with care and protect them from sharp objects. The sensor sleeve
houses a sensitive electronic device that can be damaged. Harsh treatment of
sensors will drastically reduce their lifetime.
WARNING Do not use a damaged sensor or one with exposed electrical circuits.
6S2

6S2

PAUSE
HR ALARM
LEAD
SELECT
ANALYZE
Shocks: 3
00:00:49
Monitoring Rhythm
78 Pads
SpO2