Enabling manual mode, Enabling manual mode -2 – Philips HEARTSTART XLT M3500B User Manual
Page 74
Enabling Manual Mode
6-2
Defibrillating in Manual Mode
Enabling Manual Mode
From AED Mode, press
to enable Manual Mode. If prompted, use
the softkeys above the display to enter the password.
Figure 6-1: Manual Password Display
To return to AED Mode, without entering a password, press
.
Once Manual Mode is enabled, the green LED next to
is lit.
In its default configuration, the HeartStart XLT powers on into AED Mode.
If you prefer, you can configure it to power on into Manual Mode. You have
the option to require users to enter a password in order to enable Manual
Mode from AED Mode. (See “Configuring the HeartStart XLT” on page 10-7.
WARNING
Use of a password for Manual Mode is recommended as a safety measure to deter
untrained personnel from entering Manual Mode.
Manual
1
2
3
4
EXIT
PASSWORD
Enter Password
Shocks: 3
00:00:49
(;,7
3$66:25'
Manual