Philips HEARTSTART XLT M3500B - Manual (Page 125)

Loading Printer Paper
M3500B HeartStart XLT Defibrillator/Monitor 11-11
11
3. Place a new roll of printer paper (40457C/D) into the printer paper well,
positioning the roll so that the end of the roll is on the top and the grid
faces down. Be sure to push the roll down so that it is firmly seated in the
paper well.
4. Pull the end of the paper past the paper roll.
5. Slide the printer door to the right and hold it open. Press the roller down
over the paper and release the door.
Figure 11-3 Loading Paper