Philips HEARTSTART XLT M3500B - Manual (Page 25)

Getting Acquainted
M3500B HeartStart XLT Defibrillator/Monitor 2-5
2
Display Layout
The following figures show the layout of the display in:
z AED Mode, with ECG and SpO
2
monitoring capabilities disabled.
z AED Mode, with ECG and SpO
2
monitoring capabilities enabled.
z Manual Mode.
NOTE ECG and SpO
2
monitoring capabilities for AED Mode may be enabled and
disabled independently in the configuration.
Toggles between Manual Mode and AED Mode. Manual
Mode is enabled when the green LED next to the key is lit.
A password may be required for Manual Mode entry.
Enables synchronized cardioversion when first pressed, as
indicated by the green LED; disables synchronized cardio-
version when pressed again.
Activates the pacing function buttons (as indicated by the
green LED), allowing you to use the buttons below to
define pacing rate, mode, and current output. Also turns off
the Pacer when pressed a second time.
Adjusts the pacing rate.
Delivers pacer pulses when first pressed;
stops pacing when pressed again.
Selects Demand or Fixed Mode for pacing.
Adjusts the current output for pacing.
Manual
Sync
Pacer
Rate
Start
Stop
Mode
Output