National Instruments FP-3000 User Manual
Page 144
Index
FieldPoint FP-3000 User Manual
Index-2
© National Instruments Corporation
BKCAL_HYS parameter, B-2
BKCAL_IN parameter, B-2
BKCAL_OUT parameter, B-2
BKCAL_OUT_D parameter, B-2
block instantiation, 1-3
BLOCK_ALM parameter, B-2
BLOCK_ALMS_ACT parameter, C-2
BLOCK_ERR parameter (table), B-2 to B-4
BLOCK_RESET parameter (table), C-2
blocks. See also function blocks.
alarm parameters, 4-19 to 4-20
alarming, 4-18 to 4-20
bringing online
converting 4-20 mA pressure sensor
to Fieldbus (example), 3-6
temperature control with FP-3000
(example), 3-10
controlling heating
element, 3-12 to 3-13
MODE_BLK parameter and mode
handling, F-22 to F-24
ACTUAL modes, 4-23, B-14
NORMAL mode, 4-23, B-14
operational modes (table),
4-23 to 4-24, B-15
PERMITTED mode, 4-23, B-14
TARGET mode, 4-22, B-14
overview, 4-1 to 4-3
PID control, 4-16 to 4-18
resource blocks, 4-3
status handling, 4-21 to 4-22
Limit subfield values (table), 4-22
Quality subfields (table), 4-21
Substatus field, 4-22
supported FieldPoint modules and
channels, 4-15 to 4-16
transducer blocks, 4-2
types of blocks, 4-1
BYPASS parameter, B-4
C
CAS_IN parameter, B-4
CAS_IN_D parameter, B-4
cascade initialization, D-1 to D-4
bypassing, D-3 to D-4
mode and status behavior, D-2 to D-3
parameter connections, D-1 to D-2
remote cascades, D-3
Cascade mode (table), 4-24, B-15
CDO (Complete Discrete Output) function
block
description, 4-4
interlock priorities (table), 4-4
CFG_OPTS parameter (table), C-2
channel and module selection. See module and
channel selection.
CHANNEL parameter, B-4
channels
number of channels per second, F-9
supported FieldPoint modules and
channels, 4-15 to 4-16
CHECKBACK parameter (table), C-2 to C-3
CLEAR_LOG parameter, C-3
CLR_FSTATE parameter, B-5
common questions. See troubleshooting.
Comparison operators, in Expression block
(table), 4-9
Complete Discrete Output (CDO) function
block, 4-3 to 4-4
compliance specifications, E-1
configuration
autoconfiguration, 2-16 to 2-17
common questions, F-7
configuration toggle switches
(figure), A-1
LED indicators, 2-13 to 2-16
Reset switch, A-2
Simulate Enable switch, A-1