Nortel Networks M3110 - Manual (Page 120)

Page 120 of 504 M2016S Secure Set
553-3001-367 Standard 3.00 August 2005
Line circuit card (TN) terminations are located on the horizontal side of the
distributing frame when frame-mounted blocks are used and in the white
field when wall-mounted blocks are used.
4 Run and connect the other end of the cross-connecting wire to the
assigned TN terminal block.
End of Procedure
Table 16
Z-type cross-connecting wire
Size Gauge Color Designation
1 pr 22 Y-BL
BL-Y
Tip
Ring
3 pr 24 W-BL
BL-W
W-O
O-W
W-G
G-W
Voice T
Voice R
Signal T
Signal R
Power
Power