Procedure 23 toggling control gates – Nortel Networks M3110 User Manual
Page 86
Page 86 of 504
Attendant consoles
553-3001-367 Standard 3.00 August 2005
3
Press the octothorpe (#) to exit and return to Diagnostics menu 1.
End of Procedure
Procedure 23
Toggling control gates
Use this procedure to turn the conference bridge analog control gates, the
auxiliary tone channel, and the Code Blue Relay ON or OFF. Note that the
auxiliary control only affects the control gate on the ASIP circuit card. To
actually generate a tone, use the Alerter menu.
1
From Diagnostics menu 2, press “4.”
2
Follow the appropriate instruction below:
Press key 1 to toggle the primary control gate between ON and OFF.
Press key 2 to toggle the secondary control gate between ON and OFF.
Press key 3 to toggle the attendant receive control between ON and OFF.
Press key 4 to toggle the attendant transmit control between ON and
OFF.
Press key 5 to toggle the auxiliary tone control between ON and OFF.
Press key 6 to toggle the relay control between ON and OFF.
3
Press the asterisk (*) to turn all the control gates OFF.
4
Press the octothorpe (#) to exit and return to Diagnostics menu 1.
End of Procedure
DIAGNOSTICS: CONTROL
1. SCR
2. DST
3. ARX
4. ATX
5. TON
6. REL
{ 0 }
{ 0 }
{ 0 }
{ 0 }
{ 0 }
{ 0 }
* <OFF>
# <exit>