Nortel Networks M3110 - Manual (Page 62)

Page 62 of 504 Attendant consoles
553-3001-367 Standard 3.00 August 2005
Removing the M2250 attendant console top cover
Follow the steps in Procedure 8 to remove the M2250 Attendant top cover.
Procedure 8
Removing the M2250 attendant console top cover
1 Disconnect any plugs and cords from the attendant console.
2 Remove the ten 10-mm fastening screws in the flange of the attendant
console, as well as one 10-mm and one 40-mm screw on the base of the
attendant console. See Figure 13 for the M2250 assembly drawing.
Figure 13
M2250 assembly drawing (exploded view)
553-AAA0580
LCD screen
hinge assembly
Faceplate
assembly
Ribbon cable
Base housing
assembly
Support screw
(1 of 10)
LCD screen