Nortel Networks M3110 - Manual (Page 176)

Page 176 of 504 M3900 (single site) Virtual Office
553-3001-367 Standard 3.00 August 2005
Speed Call for Virtual Office
Phase III Meridian Series Digital Telephones support Speed Call (SCU/SCC)
and System Speed Call (SSU only) on Virtual Terminal numbers.
Operating parameters
The Virtual Terminal Prime DN cannot be a Primary DN on another terminal.
The Virtual Terminal Prime DN (user A) can be the secondary DN of another
Virtual Terminal (user B). If both user A and user B are logged in, a call to
user A’s Primary DN can be answered by user B’s Secondary DN.
If Virtual Office user A logs out, user B logs in, and another user calls the
Primary DN of user A, the following scenarios can occur:
• If user A has Call Forward configured before logout, the call is
forwarded.
• If user A does not have Call Forward configured, but has Default Call
Forward (DCFW) configured, the call is forwarded to that DN (the DN
can be Call Pilot).
• If neither of the above scenarios apply, the caller receives an overflow
tone.