Nortel Networks M3110 - Manual (Page 68)

Page 68 of 504 Attendant consoles
553-3001-367 Standard 3.00 August 2005
Figure 16
M2250 designations in Unshift mode (QMT2 not enabled)
Cross-connecting attendant consoles
Terminations are located on the vertical side of the distributing frame when
frame-mounted blocks are used and located in the blue field when
wall-mounted blocks are used.
Line circuit card (TN) terminations are located on the horizontal side of the
distributing frame when frame-mounted blocks are used and located in the
white field and wall-mounted blocks are used.
Follow the steps in Procedure 12 on page 69 to cross-connect attendant
consoles.
553-AAA0584
ICI9
ICI8
ICI7
ICI6
ICI5
ICI4
ICI3
ICI2
ICI1
ICI0
LPK5
LPK4
LPK3
LPK2
LPK1
LPK0
RLS
CONF6
SHIFT
EX SR
EX DS
RL SR
RL DS
HOLD
FEAT9
FEAT8
FEAT7
FEAT6
FEAT5
FEAT4
FEAT3
FEAT2
FEAT1
FEAT0
C/H
CAS BSY
F1 F2 F4
SS SD
F3
Scrolling
LCD Display
Screen
(4 or 2 lines
for M2250)
1 2 3
4 5 6
7 8 9
0
*
#