Nortel Networks M3110 - Manual (Page 333)

Appendix A: Meridian Modular Telephones Page 333 of 504
Telephones and Consoles Description, Installation, and Operation
Service Change Parameters
Handsfree operates as if an off-hook operation had been performed. For
example, when the telephone is idle, pressing the Handsfree/Mute key turns
on the Handsfree and selects a DN (depending on line selection as assigned
through COS), enabling the user to make a call. When a call comes in to an
M2008HF/M2616 and the set is ringing, pressing the Handsfree/Mute key
turns on the Handsfree and enables the user to answer the incoming call
(depending on COS-assigned line selection) without picking up the handset.
LD 11 – Allow/Deny Handsfree for M2008HF
Prompt Response Description
REQ: NEW CHG
TYPE: M2008 M2008 telephone
CLS (HFD)
HFA
Digital Telephone Handsfree Denied
Digital Telephone Handsfree Allowed