Configuration parameters in ld 32, Single-set flash download – Nortel Networks M3110 User Manual

Page 274

Advertising
background image

Page 274 of 504

M3900 Flash Download

553-3001-367 Standard 3.00 August 2005

m (Mode) scan be:

FAST MODE (from initialization)

MAINT MODE (by ENLL command in LD 30)

BKGD MODE (second attempt after initialization from background
program)

Procedure notes:

For Symposium Call Center Server (SCCS) sites, you do not have to
de-acquire telephones from the SCCS (pulled out of all queues);
however, the statistics might not be valid.

To downgrade an M3900 telephone from Release 2 firmware to
Release 1 firmware, or to change the language file from North American
to another language file (or vice versa) use PSWV File #5 from

Table 40

on page 281

.

For the downgrades procedure and language changes, refer to the
appropriate upgrade procedures NTP:

Communication Server 1000M and Meridian 1: Large System

Upgrade Procedures (553-3021-258)

Communication Server 1000M and Meridian 1: Small System

Upgrade Procedures (553-3011-258)

Communication Server 1000S: Upgrade Procedures

(553-3031-258)

Communication Server 1000E: Upgrade Procedures

(553-3041-258)

Configuration parameters in LD 32

To use the Flash Download capability, load LD 32 and issue the following
commands.

Single-Set Flash Download

Flash DownLoad Unit (FDLU) - Initiate flash download for this unit. For
this command to work, the telephone must be in an idle state. That is, there

Advertising