Nortel Networks M3110 User Manual
Page 362
Page 362 of 504
Appendix B: Meridian Modular Telephones installation
553-3001-367 Standard 3.00 August 2005
13 If the M2317 has been connected to a line that is designated as a digital
line, but is not enabled, the display prompts CONTACT SYSTEM
ADMINISTRATOR. The line must be enabled using LD 32 from the
maintenance terminal, and by enabling the features outlined in the work
order. Refer to Software Input/Output: Administration (553-3001-311) for
the required routines, prompts, and responses.
If the M2317 has been connected to a line that is neither defined as a
digital line nor enabled, refer to Software Input/Output: Administration
(553-3001-311) for required routines, prompts, and responses.
14 Verify that all the requested features are enabled by accessing them with
the soft keys, or programmable keys, from the M2317 telephone and
observing the display screen.
15 Perform the self-test (see Procedure 64 on
) and acceptance
test procedures. See LD 31 in the Software Input/Output: Administration
(553-3001-311).
End of Procedure