Nortel Networks M3110 - Manual (Page 179)

M3900 (single site) Virtual Office Page 179 of 504
Telephones and Consoles Description, Installation, and Operation
CODE VTLF
ALL
<CR>
FFC type for logging off a Virtual Terminal
Every FFC is prompted
No further prompt; returns to “REQ”
VTLF xxxx
<CR>
Enter Virtual Terminal logging off code
Returns to “CODE”
Note: You cannot move or copy a Virtual Terminal Number.
LD 97 – Configure a Phantom loop for the Virtual Office feature
Prompt Response Description
REQ CHG Change the loop configuration
TYPE SUPL Superloops
SUPL Naaa N = designates the superloop as a phantom loop
aaa = designates the superloop number
... ... ...
LD 57 – Configure the Flexible Feature Codes for the Virtual Office feature
(Part 2 of 2)
Prompt Response Description