Nlynx ETU400 - Manual (Page 125)

ETU400 User Guide 011603 9-21
1 Execute Interactively runs the command using the saved
definition.
2 Submit to batch Prompts for the job description parameters and
submits the request to batch. Batch commands
cannot be longer than 256 characters. In order to
run a job in batch mode, the device you specify
must be powered on, running emulation, and
displaying the AS/400 sign-on screen.
NOTE: Only the ETU power commands can be submitted to batch; not the
commands FROM3XB or TO3XB.
3 Change Allows you to change the saved request.
4 Delete Deletes the specified request.
5 Extended view Displays an extended view of the request.
Only 45 characters can be displayed on the
screen. If the saved request is longer than 45
characters, it will be truncated to 45 characters
and followed by an ellipsis (...). Option 5 shows
the entire request definition.
Fold/Unfold The function key F1 provides an alternative view
of the highlighted request. It shows the name of
the user who created the definition, the device
from which it was created, the creation date, and
creation time. It also lists the name of the user
who last changed the definition, the workstation
from which it was changed, and the date and time
that the change occurred.