Nlynx ETU400 - Manual (Page 90)

ETU400 User Guide 011603 7-3
Rename a Micro File:
The RENAMEB Command
With the RENAMEB command, you can rename an existing micro file while you
are in emulation mode. You supply the current name of the micro file and
the new name. The new file uses the same path as the file it replaces.
RENAMEB Example
In this example, you are working in emulation on the AS/400 and you want
to rename a PC file called c:\data.pgm to c:\data1.pgm.
1. Choose option 20 from the ETU Main menu.
The ETU Utilities menu displays.
2. Choose option 2 from the ETU Utilities menu.
The RENAMEB prompt screen displays.
3. Enter the micro file name at the Qualified file name prompt:
c:\data.pgm
4. Enter the file's new name at the New micro file name prompt:
data1.pgm
5. Start the command by pressing ENTER.
ETU will rename the file on the PC.
Figure 7-1 The RENAMEB prompt screen
Rename a micro file: (RENAMEB)
Type choices, press Enter.
Qualified file name: . . . . . .
New micro file name: . . . . . .
Display status messages ?: . . . *YES *YES, *NO
Bottom
F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display
F24=More keys