Nlynx ETU400 - Manual (Page 167)

ETU400 User Guide 011603 10-37
from which it was transferred.
*MULTI Transfers the files into multiple host files.
Data Description Specifications (DDS) must be
specified when using *MULTI as the value in the
TOFILE parameter.
Library name The name of the library containing the host file.
The default, *LIBL, searches all libraries in
your library list for the file. You must specify
an existing library if the host file is to be
created with this command.
Member name The TOFILE member name. You may use one of the
following values.
*FILE Transfers the micro file into a
member having the same name as the
host file (the default). For use with
single file transfers, and in
conjunction with *MULTI as the TOFILE
file name parameter.
Member Transfers the files into one member
within the specified file.
*MULTI Transfers the files into multiple
members within one physical file. The
members will be assigned the same
name as the device name of the micro
from which the data was transferred.
This value is not available for *SAVF
files.
RECL The record length of the host TOFILE file. If the file will
be allocated (created) using this command, you must include
the record length of the file, or use the FLDDEFFILE
parameter. If the file already exists on the host, use the
default record length of zero.
TRANSLATE Determines if the data is to be translated, and if so, what
type of translation is to be performed. ETU supports four
translation types:
*TEXT The qualified file resides in ASCII TEXT format
and is to be translated for the AS/400. This is
the default.
*DIF The qualified file resides in DIF format and is
to be translated for the AS/400.
*BASICS The qualified file resides in BASIC Sequential
format and is to be translated for the AS/400.
*TAB The qualified file resides in BASIC Sequential
format with tab character field delimiters and is
to be translated for the AS/400.
*NONE No translation is to occur. Data will reside on
the host in ASCII or in the format in which it