Nlynx ETU400 - Manual (Page 68)

ETU400 User Guide 011603 5-8
PRTFROM3X Example
In this example, there is a host spool file on the host output queue
USER1. You will transfer the file to the PC so you can print it on the PC
printer. Translate the file to a PC using translation table member ETOA1
in the TRANSLATE file.
1. Choose option 3 from the ETU Main menu. The PRTFROM3X screen displays
(Figure 5-3).
2. Enter the output queue name at the Output queue prompt:
user1
Use *LIBL for the Output queue library name.
3. Use the defaults for the translation table file and member names,
TRANSLATE and ETOA1, respectively.
Once you have entered the appropriate information, press ENTER. The USER1
output queue displays (Figure 5-4).
Figure 5-3 The PRTFROM3X prompt screen
Host spool file to micro: (PRTFROM3X)
Type choices, press Enter.
Output queue: . . . . . . . . . Name
Library name: . . . . . . . . *LIBL Name, *LIBL
Translation table file name: . . TRANSLATE Name, TRANSLATE, MACTAB
Library name: . . . . . . . . *LIBL Name, *LIBL
Member name: . . . . . . . . . . ETOA1 Name
Bottom
F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display
F24=More keys