Nlynx ETU400 - Manual (Page 175)

ETU400 User Guide 011603 10-45
STRSEU Command
Parameter description Parameter name Parameter values
Source file SRCFIlE TRANSSRC
*PRV
file name
Library name *LIBL
library name
Source member SRCMBR *SELECT
*PRV
source member file name
Source type to create TYPE *SAME
type
Text description TEXT *BLANK
descriptive text
The STRSEU (Start Source Entry Utility) command is the AS/400 command
used to change or create a translation table. This command loads the
Source Entry Utility (SEU), which creates, changes, displays, or prints a
source member. SEU is part of the IBM AS/400 Application Development
System. For information on SEU, refer to the IBM manual AS/400
Application Tools SEU Reference Manual and User's Guide SC21-7722.
SRCFILE The name of the source file to be worked with.
Library The name of the library containing the SRCFILE file
(the same library in which ETU is stored). *LIBL is the
default.
SRCMBR The name of the source physical file member to be edited or
created. The default value depends on whether you specify the
SRCFILE parameter.
*PRV The default if you do not specify the SCRFILE
parameter. *PRV selects the name of the previous
source member used.
*SELECT The default if you do specify a value in the
SRCFILE parameter. Select a member to edit,
display, print, or remove.
source file member name
The name of the member you are creating or
editing. It is recommended that a new member be
created for update, copying one of the originally
supplied members:
PC-DOS Members
ETOA1 EBCDIC to ASCII (variable length)
ETOA2 EBCDIC to ASCII (fixed length)
ATOE1 ASCII to EBCDIC (variable and fixed length)
ATOE3 ASCII to EBCDIC (print translation)
Mac Members
ETOA1M EBCDIC to ASCII (variable length)
ETOA2M EBCDIC to ASCII (fixed length)
ATOE1M ASCII to EBCDIC