Nlynx ETU400 - Manual (Page 85)

ETU400 User Guide 011603 6-10
Suppose you previously transferred a PC print file to a host file using
the TO3XB command. Now you want to print the file on the host printer.
Before you can print the file, you must translate it using the PRTXFRMPC
command.
For this example, the PC file residing on the host is called PRINT1. When
the translation is complete, you want the file sent to the USERX output
queue. Use the defaults for all other parameters associated with this
command.
1. Choose option 20 from the ETU Main menu.
The ETU Utilities menu displays.
2. Choose option 11 from the ETU Utilities menu.
The PRTXFRMPC screen displays.
3. At the PC data file prompt, enter the file name:
print1
4. At the Output queue prompt, enter the output queue name:
userx
5. Use the defaults for the other parameters.
6. Once you have entered the appropriate information, press ENTER to
start the command.
The translation job will be sent to a job queue. After the file is
translated, the print file will be sent to the USERX output queue and
will automatically print when it reaches the top of the queue.