Nlynx ETU400 User Manual
Page 210
ETU400 User Guide 011603
C-4
To create a DDS specs for a file, use the PDM (Programming Development
Manager) utility on the AS/400. The steps below and on the following
pages describe how to create DDS specs for the file shown on the previous
page.
1. Log on to the AS/400.
2. Type STRPDM on the command line of the AS/400, and then press ENTER.
The AS/400 PDM screen, shown in Figure C-2, appears. Select option 3 and
press ENTER to work with members.
If you receive an error after this command, you may not have the
authority to perform this task; see your system administrator.
Figure C-2 The AS400 PDM screen
AS/400 Programming Development Manager (PDM)
Select one of the following:
1. Work with libraries
2. Work with objects
3. Work with members
9. Work with user-defined options
Selection or command
===>
F3=Exit F4=Prompt F9=Retrieve F10=Command entry
F12=Cancel F18=Change defaults
(C) COPYRIGHT IBM CORP. 1981, 1996.