About this guide, Who should use this guide, How this guide is organized – Nlynx ETU400 User Manual
Page 7
ETU400 User Guide 011603
vii
About This Guide
Use this guide to install and run ETU 400 on the IBM AS/400 host
computer.
Who Should Use This Guide?
All users of ETU, from the beginning user of the AS/400 to the most
advanced user, should refer to this guide. ETU interfaces directly with
the 5251 emulation software running on your microcomputer, whether it's
an IBM PC, an Apple Mac or a UNIX workstation. This guide assumes that
you have a working knowledge of your microcomputer and the emulation
software that resides on it.
How This Guide is Organized
This guide is divided into four parts. Each part is briefly described
below.
Part One:
Getting Started
Part One is intended for all users of ETU, and should be read prior to
installation. It lists the items you should have received with ETU, the
host and microcomputer hardware and software requirements for running
ETU, and installation instructions.
Part Two:
Running ETU
Part Two is intended for all users, but especially for first-time users
of ETU. It describes the basic concepts and terms used with ETU and the
AS/400. In addition, it explains the most common ETU commands and
provides examples of how to use them.
Part Three:
ETU Command Reference
Part Three is like a reference guide for ETU. It is intended for
experienced users of both ETU and the AS/400. You will find all ETU
commands listed in alphabetical order, along with the functions and the
parameters associated with each command.
Part Four:
Appendices
The appendices include supplementary technical information, followed by
an index.