Nlynx ETU400 - Manual (Page 176)

ETU400 User Guide 011603 10-46
TYPE The type of source to be edited or created. Specify any
combination up to 10 characters, or one of the AS/400 types
supported by SEU.
*SAME Specifies that the same source type is used as
when the member was edited.
type *BAS, *BASP, *CBL, *CL, *CMD, *DSPF, *LF,
*PF, *PLI, *PRTF, *PRG, *RPT, *TXT, *CLP,
*CMNF, *DFU, *QRY, *MXDF
TEXT You can enter a description that identifies the source
member. The description can be up to 50 characters. The
default is *BLANK.