Nlynx ETU400 - Manual (Page 137)

ETU400 User Guide 011603 10-7
EDTUDF Notes
Up to ten user-defined functions can be added to the ETU menu. The first
time you start the EDTUDF utility (where no user-defined functions have
previously been created), the utility will be in “add” mode. While in add
mode, you may create as many user-defined functions as you like, up to
ten.
Each time you start the EDTUDF utility, (after you add one or more user-
defined functions) it will be in “change mode”. To place EDTUDF in add
mode, use the F9 function key. While in change mode, you can change or
delete a user-defined function, or display an extended view of an
existing user-defined function.
To change a user-defined function, enter 1 next to the function you want
to change and press ENTER. Change the function by typing over the
existing text.
To delete a user-defined function, enter 2 next to the function you want
to delete and press ENTER.
To display an extended view of a function, enter 3 next to the function
and press ENTER. Extended view allows you to display function strings
that are longer than 20 positions. If the function is longer than 20
positions, it will appear on the EDTUDF screen followed by an ellipsis
(...).