Nlynx ETU400 - Manual (Page 164)

ETU400 User Guide 011603 10-34
PWRRENAMEB Command
Parameter description Parameter name Parameter values
Qualified file name QFNAME1 micro file name
New file name NEWFIL new file name
Process done on which
micro?
MICLIST *REQUESTER
device name
Display status message? DSPSTSMSG *NO or *YES
Issue PWRRENAMEB on the command line and press F4 to prompt in order to
rename an existing micro file on a specified micro or micros. You can
issue PWRRENAMEB from a micro in emulation mode or from a dumb terminal.
You can also run this command in batch mode.
The PWRRENAMEB parameters are described below:
QFNAME The name of the micro file to be renamed.
NEWFIL The new name to be given to the micro file. Do not include
the path name with the file.
MICLST The device name of the micro that contains the file to be
renamed.
*REQUESTER Renames the file on the micro from which the command is
initiated.
device name Renames the file on the micro with this device name.
DSPSTSMSG Displays program status messages during the execution of the
command.
*YES Status messages are displayed (the default).
*NO Status messages are not displayed.