Nlynx ETU400 - Manual (Page 152)

ETU400 User Guide 011603 10-22
PRTXFRMPC Command
Parameter description Parameter name Parameter values
PC data file FILE Host file name
Library name *LIBL
library name
PC data member name PCMBR FILE
member name
Output queue OUTQ host output queue
name
Library name *LIBL
library name
Lines per page LINES 66
lines per page
Lines per inch LPI 6
lines per inch
Characters per inch CPI 10
characters per
inch
Form width WIDTH 132
form width
Overflow line number OVERFLOW 63
overflow line
Type of form label FORMTYPE *STD
forms type
Number of copies COPIES 1
number of copies
Place job on hold? HOLD *NO or *YES
Translation table name TRANSFILE TRANSLATE
file name
Library name *LIBL
library name
Translation table member
name
TRANSMBR ATOE3
member name
The PRTXFRMPC is a batch-mode command that translates PC-DOS print files
that were previously transferred from the PC by the TO3XB command. The
print file is added to an AS/400 print queue after the translation.
Mac Users: Do not run this procedure. It is intended for use only with
PC-DOS.
FILE The AS/400 file name that contains the print file moved from
the micro (with no translation having been done).
Library The name of the library containing the micro
print file. *LIBL is the default.
PCMBR The member containing the micro print file. The default is
FILE.
OUTQ The output queue name, where the new print item is placed
after the PRTXFRMPC translation occurs.
Library The library containing the output queue. *LIBL is the
default.
LINES The number of lines per page for the new print job being
added to the AS/400 print queue. The default is 66.