Nlynx ETU400 - Manual (Page 250)

ETU400 User Guide 011603 E-12
PROBLEM
“USR9971 A DIF record found in PC file has record Length greater than allowed maximum of
258”.
CAUSE:
The library containing the ETU programs is not in your library list.
SOLUTION:
Add the library containing the ETU programs to your library list.
CAUSE:
While translating a DIF, BASICS, or TAB formatted file into the host format, field over 258 bytes was
encountered. DIF fields are terminated by an End-of-File (normally 0D0A - carriage return/line
feed), and BASICS/TAB are separated by a specified delimiter. Over 258 characters were
encountered while processing the data file with no intervening end of field designation.
SOLUTION:
Insure that the PC data file is in the format specified for the translation type on the command.
Correct the data file or command.
PROBLEM
“USR9972 Translation encountered unexpected characters in a field defined as numeric”.
CAUSE:
The translation was converting data to a numeric field and encountered an unexpected character
SOLUTION:
Verify that the PC file format and the Translation type on the ETU command match. If the formats
are correct, verify the field definitions of the host file match the PC file.
PROBLEM
“USR9985 Default data-area not found”.
CAUSE:
The library containing the ETU programs is not in your library list.
SOLUTION:
Add the library containing the ETU programs to your library list.
ADDLIBLE PCTRAN