Nlynx ETU400 User Manual
Page 241
Advertising
ETU400 User Guide 011603
E-3
USR MESSAGES:
If a USR message that you are experiencing is not in this document, please try this procedure, on
the AS/400, to get more information:
1. Go to a command line and type: WRKMSGF ETUMSGF and press the <Enter> key.
2. Take a 5 on the ETU message file.
3. Type the error message (USR####) in the 'Position to . . .' field and press <Enter>.
NOTE: If the error message does not show up here, it is not an ETU error message.
NOTE: For CPF messages that are not in this document follow the above procedure using
WRKMSGF QCPFMSG.
Advertising