Features of version 5.5 – Nlynx ETU400 User Manual
Page 23
ETU400 User Guide 011603
1-7
Features of Version 5.5
Version 5.5 and the changes to it are as follows:
This version has been created to remove the need for registration with
ETU (the Y2K changes are now redundant).
1. Changed save command to use V3R6 rather than *PRV, so that once built
ETU can be used on any version of RISC OS400.
2. Changed all RPG programs to ignore decimal data errors, to solve
problems that were occurring with spreadsheet data.
3. Transfer commands with *DIF file translation, would replace a “"” (one
quote) embedded in the data stream with “""” (two quotes) (for the
commands that were missed when V5.01 was created).
4. Corrected LOCAL/REMOTE option for when you are connected to a remote
controller.
5. Changed user message to read - &bytes moved to PC, and added, &bytes
moved from PC.
6. Changed the build command so that no checking is done for the version
of ETU - had to keep changing it each time we built a new version.
7. There is no longer default install library - user must specify at
installation.