Nlynx ETU400 User Manual
Page 211
ETU400 User Guide 011603
C-5
3. The Select Members screen, shown in Figure C-3, appears. Type the
required data in each prompt as explained in the following instructions,
and then press ENTER.
Figure C-3 The Select Members screen
Specify Members to Work With
Type choices, press Enter.
File . . . . . . . . . . QDDSSRC Name, F4 for list
Library . . . . . . . . *LIBL *LIBL, *CURLIB, name
Member:
Name . . . . . . . . . *ALL *ALL, name, *generic*
Type . . . . . . . . . *ALL *ALL, type, *generic*, *BLANK
F3=Exit F4=Prompt F5=Refresh F12=Cancel
Type QDDSSRC in the File prompt.
In the Library prompt, type the name of the library in which you would
like to store your DDS. If you are unsure, consult your system
administrator. This example uses QGPL, the general purpose library.
In the Member Name prompt, type SAMPLE.
Press ENTER.