Nlynx ETU400 - Manual (Page 233)

ETU400 User Guide 011603 D-10
9. Display the next statement number by typing I1 over the first two
positions of the line containing statement 0003.00 and pressing Enter.
When the new statement line is displayed, press F4 to display a prompt in
which to enter the input specification.
10. The field statement number 0004.00 appears. Here you will define
the second field in the SAMPLE file. Enter the data exactly as shown in
the data area prompt at the bottom of screen, as shown in Figure D-6, and
then press ENTER
Figure D-6 SEU Edit screen for line 0004.00
Columns . . . : 1 80 Edit
QGPL/QRPGSRC
SEU==>
SAMPLE
FMT F .....FFilenameIPEAF....RlenLK1AIOvKlocEDevice+......KExit++Entry+A....U1........
*************** Beginning of data **********************************************
0001.00 FSAMPLE IP F 128 DISK
0002.00 ISAMPLE NS
0003.00 I 1 17 NAME
0004.00
****************** End of data *************************************************
Prompt type . . . ** Sequence number . . . 0004.00
Data area
....+... 1 ...+... 2 ...+... 3 ...+... 4 ...+... 5 ...+... 6
I 18 52 TITLE
F3=Exit F4=Prompt F5=Refresh F11=Previous record
F12=Cancel F23=Select prompt F24=More keys
The Type entry is not H, F, E, L, I, C, O, or U (position 6).
Column 6 is the Form Type and must contain the letter I, which designates
this record as an input specification.
Use columns 44 through 47 to enter the beginning position of the Job
Title field. This field starts at position 18.