Nortel Networks 6.1 - Manual (Page 150)

150 / Customizing your telephone
Compact ICS 6.1 System Coordinator Guide P0603544 02
Displays
The name of the feature assigned to a button is
displayed when you press the button.
SHOW
appears when there is more information
available. Press
£
or SHOW for additional
information.
If you are checking a speed dial button, enter
the three-digit speed dial code that you want to
check.
Enter the feature code, or press ¨ or QUIT to
quit programming or CLEAR to clear the numbers
you have entered. The system accepts the
entry as soon as you enter a valid feature code.
Press
²
and enter the feature code you want
to assign to the button. You cannot enter invalid
codes.
You have programmed a button with a feature
that was already programmed onto another
button. The feature has moved to the button
you just programmed. Its original button is now
blank.
Press the button you want to check. Press
²
or EXIT when you are finished.
Enter the number you want to program and
press
³
. To erase the button, just press
³
.
Enter the number you want to program and
press
OK . To erase the button, just press
³
or OK .
For other displays, see ‘‘Common feature displays’’ on page 253.
<Feature name>
SHOW OK
Enter code:
F__
QUIT
CLEAR
Feature code:
QUIT
Feature moved
Press a button
EXIT
Program and HOLD
Program and OK
QUIT OK