Nortel Networks 6.1 - Manual (Page 62)

62 / Answering calls
Compact ICS 6.1 System Coordinator Guide P0603544 02
On an M7100 or T7100 telephone:
1. Press
²£Ü
, to place one caller on hold. Press
³
again, to
put the caller you want to keep on hold.
2. Press
¨
. The call is disconnected.
3. Press
³
to speak to the remaining party.
Independently holding two calls
For all telephones except the M7100 and T7100 telephones, you can put the
two people in a conference call on hold independently so that they cannot
talk to each other.
1. Press the line button of one person. The other person is automatically
put on hold.
2. Press
³
. The second person is put on hold.
You can re-establish the conference.
1. Take one call off hold.
2. Press
²Ü
.
3. Take the other call off hold.
Putting a conference on hold
You can put a conference on hold, allowing the other two people to
continue speaking to each other by pressing
³
.
You can reconnect to the conference by pressing either of the held line
buttons. For M7100/T7100 telephones, press
³
.