Nortel Networks 6.1 - Manual (Page 187)

Using the Hospitality features / 187
P0603544 02 Compact ICS 6.1 System Coordinator Guide
Programming room information
Use this setting to assign set DNs to a specific room.
1. Place the appropriate programming overlay on the set you are using to
do programming.
2. Press
²¥¥ЫЯЯЬЭЭ (CONFIG). The display shows
Password:.
3. Press
ЫЬЯЭЯ (ADMIN). The display shows
Terminals&Sets.
4. Press ‘ until the display shows Hospitality.
5. Press ≠ until Room/desk info displays.
6. Press ≠. Show set: displays.
7. Enter a room set number or press LIST and press ‘ until you
find the DN of the set you want to assign to a room.
8. Press ≠. Room #:None displays.
9. Press CHANGE and enter the room number, then press OK.
10. Press ‘. Adm pwd req’d:Y displays
11. Press CHANGE and choose Y or N, depending on your security
requirements.
Call restrns
Call restrictions can be set up by the system administrator. Refer to the
Compact ICS Installer Guide for details.
Service times
You can set the time when occupied rooms change from Service done to
Service required. This setting affects the Room condition feature.
1. Place the appropriate programming overlay on the set you are using to
do programming.
2. Press
²¥¥ЫЯЯЬЭЭ (CONFIG). The display shows
Password:.