Nortel Networks 6.1 - Manual (Page 224)

224 / Using System features
Compact ICS 6.1 System Coordinator Guide P0603544 02
Services that have been turned on automatically are indicated by an asterisk
(*) before the name on the display. You can neither manually activate nor
cancel automatically-scheduled services, although you can override them
by manually turning on another schedule.
The control telephone can override Services that are turned on and off
according to a schedule at any time by entering a Services feature code, and
then by selecting a different schedule. This override remains in effect until
it is canceled. If you select a schedule with an asterisk (*), the next
automatic service schedule comes into effect at the programmed time.
Direct-dial calls to a direct-dial telephone ring at the extra-dial telephone
(the extra-dial telephone is designated by your installer or customer service
representative) only when you enter the Ringing service feature code
(
²¡àÚ) at that direct-dial telephone. Note that only the extra-dial
telephone is activated, not the actual Ringing service (unless that
direct-dial telephone is a control telephone).
There is a Service active in your system. Press
• or LIST to view the active Services.
For other displays, see ‘‘Common feature displays’’ on page 253.
Tip - Norstar provides six service schedules named
Night, Lunch, Evening, Sched 4, Sched 5, and Sched 6.
Your installer or customer service representative can
change these names to suit your business.
Services ON
LIST